|
Product Details:
|
| Product: | 2.8 Inch TFT LCD | Resolution: | 240 X 320 |
|---|---|---|---|
| Color: | 262K | Touch Screen: | Without Resistive TP |
| Interface: | SPI/MCU/SPI+RGB | Viewing Direction: | IPS, All Viewing Angles |
| Driver IC: | ILI9341V | Connection: | Plugging In |
| Surface Luminance: | 1000 Cd/m2(nits) | Pin Number: | 50 Pins |
| LED Lifetime: | 40,000 Hours | Compliance: | REACH & RoHS Compliant |
| Highlight: | Sunlight Readable TFT LCD,240 X 320 Dots TFT LCD,2.8 Inch TFT LCD |
||
** Datasheet Download **
SFTO280TZ-7214AT Specification.pdf
About this item SFTO280TZ-7214AT high brightness 1000nits
High brightness daylight readable 2.8-inch IPS TFT LCD display, equipped with 240 x 320 pixel resolution and resistive touch screen, is a display device designed specifically for outdoor or bright environments. The following is a detailed introduction of SFTO280TZ-7214AT from Saef Technology:
1. Display screen specifications:
-Size: 2.8 inches, suitable for portable devices and applications with limited space.
-Resolution : 240 x 320 pixels, providing clear image and text display.
-Resistive touch screen : Supports single touch, allowing users to operate through the touch screen, suitable for basic interaction needs.
-High brightness: The backlight brightness can reach 1000 cd/m ², ensuring clear readability in direct sunlight or bright environments.
-IPS technology: In Plane Switching (IPS) technology provides a wide viewing angle, ensuring a good visual experience from different angles.
-SPI/MCU/SPI+RGB interface: This product is compatible with multiple interfaces, providing customers with design convenience; The product adopts a plug-in FPC, which maximizes the stability of product installation on the client side.
2. Reliable display specifications:
-Wide temperature operation: able to adapt to a temperature range from -20 °C to 70 °C, suitable for various environmental conditions.
-Industrial grade design: Durable construction and materials ensure stable operation even in harsh environments.
-Anti glare treatment: reduces reflection and glare under direct sunlight, and improves the readability of the screen.
-Compliant with RoHS and REACH: meets environmental standards for hazardous substance restrictions.
3. Customized Services :
-Customization Options: Customization services may be provided, including specific interfaces, sizes, brightness, etc., to meet the needs of specific customers.
4. Application Scenarios :
-Suitable for applications such as outdoor information handheld devices, industrial control panels, medical equipment, automotive displays, digital signage, etc. that require clear display under strong light.
This 2.8-inch IPS TFT LCD display is an ideal choice for industrial and commercial applications that require clear display in various lighting conditions due to its high brightness, wide viewing angle, and daylight readability.
Features
| General Information Items | Specification | Unit |
| Main Panel | ||
| Display area(AA) | 43.2(H) *57.6(V) (2.8inch ) | mm |
| Driver element | a-Si TFT active matrix | - |
| Display colors | 262K | colors |
| Number of pixels | 240(RGB) *320 | dots |
| Pixel pitch | 0.180(H) *0.180(V) | mm |
| Viewing angle | ALL | o'clock |
| Drive IC | ILI9341V | - |
| Color Pixel Arrangement | RGB vertical stripe | |
| Display mode | Transmissive/ Normally Black | - |
| Operating temperature | -20～+70 | ℃ |
| Storage temperature | -30～+80 | ℃ |
Mechanical Information
| Item | Min. | Typ. | Max. | Unit | Note | |
| Module size | Horizontal(H) | - | 50.00 | - | mm | ±0.2 |
| Vertical(V) | - | 69.20 | - | mm | ±0.2 | |
| Depth(D) | - | 3.99 | - | mm | ±0.2 | |
| Weight | - | TBD | - | g | - | |
Outline Drawing
PIN DESCRIPTION
| Pin NO. | Symbol | Level | Function |
| 1 | LEDK | L | BacklightK |
| 2~5 | LEDA | H | BacklightA |
| 6 | IM0 | H/L | Select the MCU interface mode NOTE( 1) |
| 7 | IM1 | H/L | |
| 8 | IM2 | H/L | |
| 9 | IM3 | H/L | |
| 10 | RESED | H/L | Hardware reset pin |
| 11 | VSYNC | H/L | Vertical (Frame) synchronizing input signal for RGB |
| 12 | HSYNC | H/L | Horizontal (Line) synchronizing input signal for RGB |
| 13 | DOTCLK | H/L | Dot clock signal for RGB interface operation. |
| 14 | ENABLE | H/L | Data enable signal for RGB interface operation. |
| 15~32 | D17-DB0 | H/L | Data bus |
| 33 | SD0 | H/L | SPI interface output pin. |
| 34 | SDA | H/L | SPI interface input pin. |
| 35 | RD | H/L | Read enable clock pin |
| 36 | WR-RS | H/L | A register select signal |
| 37 | RS-SCL | H/L | Write enable clock input pin |
| 38 | CS | H/L | Chip select input pin |
| 39 | TE | H/L | Tearing effect output |
| 40 | IOVCC | H | Power supply( 1.8V) |
| 41 | IOVCC | H | Power supply(2.8-3.3V) |
| 42 | VCI | H | Power supply(2.8-3.3V) |
| 43 | GND | L | Ground |
| 44 | XR | / | / |
| 45 | YD | / | / |
| 46 | XL | / | / |
| 47 | YU | / | / |
| 48 | GND | L | Ground |
| 49 | GND | L | Ground |
| 50 | GND | L | Ground |
ABSOLUTE MAXIMUM RATINGS
|
Item |
Symbol |
Values |
Unit |
|
| Min | Max. | |||
| Supply Voltage for Logic circuit | IOVCC | -0.3 | 4.6 | V |
| Supply Voltage for analog circuit | VCI | -0.3 | 4.6 | V |
OPERATING CONDITIONS
|
Item |
Symbol |
Values |
Unit |
Remark |
||
| Min | Typ | Max. | ||||
| Power Supply | VCC | 2.7 | 2.8 | 3.3 | V | |
| Power Supply | IOVCC | 1.7 | 1.8 | 3.3 | V | |
| Normal mode Current consumption | Icc | - | 12 | - | mA | VCC=2.8V |
| TFT Gate ON Voltage | VGH | 15 | V | |||
| TFT Gate OFF Voltage | VGL | -7.5 | - | V | ||
BACKLIGHT UNIT (GND=0V)
|
Item |
Symbol |
Values |
Unit |
Remark |
||
| Min | Typ | Max. | ||||
| Forward supply Voltage | Vf | 2.8 | - | 3.4 | V | |
| Forward supply Current | If | - | 120 | - | mA | |
| LCM Luminance | LV | 900 | 1000 | - | cd/m2 | IB= 120mA |
| Uniformity | / | 80 | % | - | ||
Product Image
FACTORY FACILITIES AND CERTIFICATES
Frequently Asked Questions
Q1. Can I order samples?
A: Yes, we welcome sample orders to test and inspect quality. Mixed samples with different project numbers are acceptable.
Q2. How about the delivery time?
A: For ready-made products, provide stock samples immediately. Remaking the sample takes 1-1.5 weeks. Batch production takes 4-6 weeks. For product design, 2-3 days are allocated for meeting and proposal; 2 weeks for drawing approval and sample preparation; The trial operation/mass production after sample approval takes 5-6 weeks.
Q3. Do you have a minimum order quantity limit for samples and production orders?
A: The minimum order quantity is low. 3-5 samples can be provided for inspection. The minimum order quantity for mass production is usually 1K per batch. We support trial run/PP run orders with a quantity lower than the minimum order quantity for MP.
Q4. How do you transport the goods and how long will it take to arrive?
A: Ship via DHL, UPS, FedEx, or TNT. It takes 5-7 days to arrive. Air and sea freight are also optional.
Q5. How to order LCD display module?
A: First, let us know your requirements or application.
Secondly, we will provide a quotation based on your requirements or our suggestions.
Thirdly, the customer confirms the sample and pays a deposit for the formal order.
Fourthly, we arrange production.
Q6. Can I print my logo on LCD products?
A: Yes, it is. Please inform us officially during the design phase that we will produce samples with your logo for you to test and approve. After the sample is approved, mass production will be carried out according to the approved sample.
Q7: Do you provide guarantees for the product?
A: Yes, we offer a one-year warranty for our products.
Q8: How to handle faults?
A: Firstly, our products are produced under a strict quality control system, with a defect rate of less than 0.2%.
Secondly, during the warranty period, we will send new LCD displays and small batches of new orders. For defective bulk products, we will repair and resend them to you, or we can discuss the solution including re-call according to real situation.
Contact Person: Cologne Ke
Tel: +8613502983321
Fax: 86-755-2370-9419
