|
Product Details:
|
| Product: | 6.2 Inch TFT | Resolution: | 1024x600 Pixels |
|---|---|---|---|
| Model No.: | SFTO620BH-7180AN | Surface Luminance: | 1000 Cd/m2 (nits) |
| Touch Screen: | Without | Viewing Direction: | IPS, Full Viewing Angle |
| Pin Number: | 50 Pins | Connection: | ZIF |
| Interface: | RGB 24 Bits | LED Lifetime: | 40,000 Hours |
| Outline Dimension: | 143.37(W)×87.13(H)×2.56(T) (mm) | Top:: | -30°C To +80°C |
| Active Area: | 137.47(W) X 77.23(H) (mm) | Compliance: | REACH & RoHS Compliant |
| Highlight: | 6.2 Inch TFT LCD Display,1024*600 TFT LCD Display,Automotive IPS Screen Panel |
||
6.2 Inch 1024*600 IPS TFT LCD RGB Interface Product Introduction
The 1024 * 600 arrangement is a common 16:9 display dot matrix. Due to its high resolution, 1024 * 600 dot matrix displays have unique advantages in various application scenarios.
In different application scenarios, such as industrial automation and control systems, medical equipment, cockpits of transportation vehicles such as airplanes and trains, and some high-end consumer electronics products, the high-resolution feature of 1024 * 600 dot matrix displays can bring clearer visual output and meet the high requirements of professional fields for image quality. Meanwhile, with the advancement of technology and the reduction of costs, this dot matrix display technology is expected to be applied and promoted in more fields.
This model SFTO620BH-7180AN has a 6.2-inch display screen, 1024 * 600 dot matrix, and uses IPS technology, allowing users to experience a perfect visual experience from different angles. Its operating voltage is only 3V-3.6V, with a typical voltage of 3.3V and a surface brightness of 1000nits. Users can add RTP or CTP on the display screen to enhance the human-computer interaction effect.
|
Characteristics
|
Size | 6.2 inch |
| Resolution | 1024(horizontal)*600(Vertical) | |
| Interface | 24BIT RGB | |
| Connect type | Connector | |
| Color Depth | 16.7M | |
| Technology type | a-Si | |
| Pixel pitch (mm) | 0.13425x0.12872 | |
| Pixel Configuration | R.G.B. Vertical Stripe | |
| Display Mode | Normally Black | |
| LCD Driver IC | - | |
| Viewing Direction | IPS, All viewing angles | |
| Gray Scale Inversion Direction | ALL | |
|
Mechanical
|
LCM (W x H x D) (mm) | 143.37*87.13*2.56 |
| Active Area(mm) | 137.472 x 77.232 | |
| With /Without TSP | Without TSP | |
| Weight (g) | TBD | |
| LED Numbers | 20LED |
6.2 Inch 1024*600 IPS TFT LCD RGB Interface Product Drawing
Interface Pin Description
| Pin.No | Symbol | Function |
| 1,2 | VLED+ | Power for LED backlight (Anode) |
| 3,4 | VLED- | Power for LED backlight (Cathode) |
| 5 | GND | Power ground |
| 6 | NC | Not connect |
| 7 | DVDD | Digital Power |
| 8 | NC | Not connect |
| 9: | DE | Data Enable signal. |
| 10 | VSD | Vertical sync input. Negative polarity |
| 11 | HSD | Horizontal sync input. Negative polarity |
| 12-19 | B7-R0 | Blue Data |
| 20-27 | G7-G0 | Green Data |
| 28-35 | R7-R0 | Red Data |
| 36 | GND | Ground |
| 37 | DCLK | Colock signal |
| 38 | GND | Display on/off |
| 39 | SHLR | Left or Right Display Control |
| 40 | UPDN | Up / Down Display Control |
| 41 | NC | Not connect |
| 42 | NC | Not connect |
| 43 | VPP | OTP Power(+7.8V) |
| 44 | RSTB | Global reset pin. Active low to enter reset state.OTP reset Suggest to connecting with an RC reset circuit for stability. Normally pull high. (R=10KΩ , C=1μF) |
| 45 | SCL | OTP Serial clock input |
| 46 | NC | Not connect |
| 47 | NC | Not connect |
| 48 | GND | Power ground |
| 49 | SDA | OTP Serial data input |
| 50 | CS | OTP Chip select pin |
Absolute Maximum Ratings
| Item | Symbol | MIN | MAX | Unit |
| Supply Voltage | VDD | -0.3 | 5.0 | V |
| Input Signal Voltage | Vin | -0.3 | VDD+0.3 | V |
| Logic Output Voltage | VOUT | -0.3 | VDD+0.3 | V |
| Operating Temperature | TOPR | -30 | 80 | ℃ |
| Storage Temperature | TSTG | -30 | 80 | ℃ |
Driving Backlight
| Item | Symbol | MIN | TYP | MAX | Unit |
| LED current | IF | - | 100 | - | mA |
| Power Consumption | - | - | mW | ||
| LED Voltage | VF | - | 24 | - | V |
| LED Life Time | WBL | 25000 | - | Hr |
6.2 Inch 1024*600 IPS TFT LCD RGB Interface Product Image
Reliability Testing
| Test Item |
Test Condition |
Inspection after test |
| High Temperature Operation | 85℃ for 96 hours |
After the Testing is completed, the tested LCD samples must be placed in a normal indoor temperature and humidity environment for 2-4 hours or more before functional and visual inspection. The samples are not allowed to have the following defects: 2. Each tested module can only be used for one of the testing projects |
| Low Temperature Operation | -30℃ for 96 hours | |
| High Temperature Storage | 85℃ for 96 hours | |
| Low Temperature Storage | -30℃ for 96 hours | |
| High Temperature Operation Humidity Operation | 60℃, 90%RH for 72 hours | |
| Thermal Shock | -10℃(30min) ~+25℃(5min)~ +60℃(30min) for 10 cycles | |
| Vibration Test (No Operation) |
Frequency: 10~55Hz Amplitude:1.0mm Sweep Time: 11min Test Period: 6 Cycles for each direction of X, Y, Z |
|
| Static electricity test | Touch ±4KV,air touch ±8KV |
Facilities and Certificates
Contact Person: Cologne Ke
Tel: +8613502983321
Fax: 86-755-2370-9419
