23.8 Inch LVDS FHD 1920*1080 PCAP TFT Display With USB Capacitive Touch Control

23.8 Inch LVDS FHD 1920*1080 PCAP TFT Display With USB Capacitive Touch Product Introduction

SFTO2380SY-7090A-CT is a color active matrix TFT LCD module using amorphous silicon TFT‘s (Thin Film Transistors) as an active switching devices. This module has a 23.8 inch diagonally measured active a rea with Full-HD resolutions (1920 horizontal by 1080 vertical pixel array). Each pixel is divided into RED, GREEN, BLUE dots which are arranged in vertical stripe and this module can display 16.7M(Round up)(6bit+2FRC) colors and color gamut 45%. The TFT-LCD panel used for the Notebook PC. The LED driver for back-light driving is built in this model. All input signals are LVDS interface compatible.

Features

*This TFT display 23.8 inches has high-speed response characteristics.
* TFT display 23.8-inch product itself is 6-bit (Hi-FRC) color depth and displays 16.7M colors.
* This 23.8 monitor is a built-in edge type (LED) backlight.
* This PCAP 23.8 inch monitor has good color saturation and is compatible with RGB 98% and NTSC 72%.
* This 23.8 TFT monitor has ultra-high brightness and contrast, the brightness can be 1000nits-1500nits, which is fully readable in sunlight, and at the same time, LCD is the function of low reflection and wide viewing angle.
* This 23.8 industrial TFT display screen is only DE (data enabled).
* This 23.8 medical grade monitor is a green and environmentally friendly product, Rohs and halogen free.
* This 23.8 inch TFT capacitive touch screen monitor complies with TEO 6.0 and ES6.0 standards.
* This 23.8" TFT capacitive touch screen monitor comes with gamma correction function.

23.8 Inch LVDS FHD 1920*1080 PCAP TFT Display With USB Capacitive TouchProduct Image

( with USB Capacitive Touch Screen, Touch Lens/cover glass is customizable )

( without Touch screen )  

23.8 Inch LVDS FHD 1920*1080 PCAP TFT Display With USB Capacitive Touch Product Drawing

 
Factory Facilities and Certificates

 
Handling & Cautions
(1) Cautions when taking out the module
> Pick the pouch only, when taking out module from a shipping package.
(2) Cautions for handling the module
> As the electrostatic discharges may break the LCD module, handle the LCD
module with care. Peel a protection sheet off from the LCD panel surface as
slowly as possible.
> As the LCD panel and back - light element are made from fragile glass material,
impulse and pressure to the LCD module should be avoided.
> As the surface of the polarizer is very soft and easily scratched, use a soft dry
cloth without chemicals for cleaning.
> Do not pull the interface connector in or out while the LCD module is operating.
> Put the module display side down on a flat horizontal plane.
> Handle connectors and cables with care.
(3) Cautions for the operation
> When the module is operating, do not lose CLK, ENAB signals. If any one of
these signals is lost, the LCD panel would be damaged.
> Obey the supply voltage sequence. If wrong sequence is applied, the module
would be damaged.
(4) Cautions for the atmosphere
> Dew drop atmosphere should be avoided.
> Do not store and/or operate the LCD module in a high temperature and/or
humidity atmosphere. Storage in an electro-conductive polymer packing pouch and under relatively low temperature atmosphere is recommended.
(5) Cautions for the module characteristics
 Do not apply fixed pattern data signal to the LCD module at product aging.
> Applying fixed pattern for a long time may cause image sticking.
(6) Other cautions
> Do not disassemble and/or re-assemble LCD module.
> Do not re-adjust variable resistor or switch etc.
> When returning the module for repair or etc., Please pack the module not to be broken. We recommend to use the original shipping packages.

Contact Us 
Welcome to inquire sales2@saef.com.cn