Leave a Message
We will call you back soon!
Your message must be between 20-3,000 characters!
Please check your E-mail!
More information facilitates better communication.
Submitted successfully!
We will call you back soon!
Leave a Message
We will call you back soon!
Your message must be between 20-3,000 characters!
Please check your E-mail!
—— Andreas Anderssons
—— Evto-WEb Aps. Denmark
—— Richard Ingram
—— Darkwynd
—— Libby
—— Michael Helms
—— DEMAC S.A.
—— J Rau
—— Daniel Champagne
—— GeorgeB
—— Detta
—— Ryan James
—— Fletcher
—— Josh
—— Andreas Anderssons
—— Frank
—— Eric M.
—— Joseph Woodcock
—— William Klein
—— Peter Franzke
—— Tisagh Chase
—— Jordan L
—— Jeff
—— Niccolò
—— Valentino
—— Charlotte
—— Elissa Decker
—— Virtuarium
—— Brooke
—— Gao Vang
—— Stephanie Jade
—— staci
—— Alex Bowers
—— Nick
—— Taylor D Fussell
—— Ginnart
—— Sarah
—— Jose Sanchez
—— Maliboogal
—— Frederick Brown
—— Joachim Wandji
For embedded systems engineers, integrating a TFT display involves more than just picking a resolution. Interface compatibility, power sequencing, and signal integrity are just as important. Let’s take a closer look at the SFTC400B-8951AN—a 4-inch square TFT module from Saef Technology Limited—and explore what makes it a technically sound choice for professional applications.
This module supports both 3-wire SPI and RGB interfaces, allowing designers to choose the best fit for their MCU or FPGA. The RGB interface uses 18 data lines (6 per color) and standard sync signals (HSYNC, VSYNC, DE, PCLK), making it compatible with most display controllers.
With a 40-pin 0.5mm pitch FPC connector, the module provides:
Dedicated power pins (VCI, TP_VCI)
Reset and control signals
I2C touch interface (though this model is without CTP)
LED backlight drive (A/K pins)
The datasheet specifies a power-on sequence where VDD must stabilize before the display is enabled, and the backlight should be turned on only after 200ms. Adhering to these timings ensures long-term reliability and avoids display artifacts.
With a typical contrast ratio of 900:1 and a brightness of 450 cd/m², the screen remains readable even under bright ambient light. The 70% NTSC color gamut ensures accurate color representation—key for diagnostic or status-indicating UIs.
The module has been tested under:
High-temperature operation (70°C for 120 hours)
Thermal cycling (-20°C to 70°C)
Humidity exposure (40°C, 90% RH)
These tests ensure that the display will perform reliably in real-world conditions.
Whether you're building a industrial handheld terminal, a laboratory instrument, or a smart home controller, the SFTC400B-8951AN offers a robust, easy-to-integrate display solution. With clear documentation and reliable performance, Saef Technology Limited continues to support engineers with high-quality components for demanding applications.

