Leave a Message
We will call you back soon!
Your message must be between 20-3,000 characters!
Please check your E-mail!
More information facilitates better communication.
Submitted successfully!
We will call you back soon!
Leave a Message
We will call you back soon!
Your message must be between 20-3,000 characters!
Please check your E-mail!
—— Andreas Anderssons
—— Evto-WEb Aps. Denmark
—— Richard Ingram
—— Darkwynd
—— Libby
—— Michael Helms
—— DEMAC S.A.
—— J Rau
—— Daniel Champagne
—— GeorgeB
—— Detta
—— Ryan James
—— Fletcher
—— Josh
—— Andreas Anderssons
—— Frank
—— Eric M.
—— Joseph Woodcock
—— William Klein
—— Peter Franzke
—— Tisagh Chase
—— Jordan L
—— Jeff
—— Niccolò
—— Valentino
—— Charlotte
—— Elissa Decker
—— Virtuarium
—— Brooke
—— Gao Vang
—— Stephanie Jade
—— staci
—— Alex Bowers
—— Nick
—— Taylor D Fussell
—— Ginnart
—— Sarah
—— Jose Sanchez
—— Maliboogal
—— Frederick Brown
—— Joachim Wandji
For engineers designing energy-sensitive or long-lifetime products, power management and reliability are non-negotiable. The SFOS223XZ-12832PA-N OLED module addresses these priorities with optimized electrical characteristics and robust construction.
The module operates with a typical logic current (IDD) of 180µA and a panel supply current (ICC) of 18mA under normal conditions. In sleep mode, these values drop to just 1µA and 2µA respectively, making it an excellent choice for battery-powered devices. These specs are particularly relevant for German automotive and U.S. industrial applications where energy efficiency is critical.
A key design consideration is the module’s power sequencing requirement. To protect the OLED panel and driver IC, VDD must be powered before VCC, and a 100ms delay is recommended after VCC stabilization before sending the display-on command. This careful sequencing prevents voltage spikes and ensures consistent performance over time.
The SFOS223XZ-12832PA-N also includes an internal ESD protection circuit and supports an external electronic switch to prevent leakage current—a common pitfall in display integration. The IREF pin allows for brightness adjustment via an external resistor, enabling designers to fine-tune visibility while managing power consumption.
From a reliability standpoint, the module has been tested under extreme conditions, including high/low temperature operation, thermal shock, and humidity exposure. With a lifetime of up to 50,000 hours at 60 cd/m², it offers long-term stability for applications such as industrial controls, instrumentation, and outdoor displays.
Saef Technology Limited has designed this module to withstand the rigors of real-world use, with clear handling and storage guidelines to prevent damage from static electricity, mechanical stress, or environmental exposure. For designers in the U.S. and Germany looking for a dependable, long-life display solution, the SFOS223XZ-12832PA-N is a compelling choice.

