Leave a Message
We will call you back soon!
Your message must be between 20-3,000 characters!
Please check your E-mail!
More information facilitates better communication.
Submitted successfully!
We will call you back soon!
Leave a Message
We will call you back soon!
Your message must be between 20-3,000 characters!
Please check your E-mail!
—— Andreas Anderssons
—— Evto-WEb Aps. Denmark
—— Richard Ingram
—— Darkwynd
—— Libby
—— Michael Helms
—— DEMAC S.A.
—— J Rau
—— Daniel Champagne
—— GeorgeB
—— Detta
—— Ryan James
—— Fletcher
—— Josh
—— Andreas Anderssons
—— Frank
—— Eric M.
—— Joseph Woodcock
—— William Klein
—— Peter Franzke
—— Tisagh Chase
—— Jordan L
—— Jeff
—— Niccolò
—— Valentino
—— Charlotte
—— Elissa Decker
—— Virtuarium
—— Brooke
—— Gao Vang
—— Stephanie Jade
—— staci
—— Alex Bowers
—— Nick
—— Taylor D Fussell
—— Ginnart
—— Sarah
—— Jose Sanchez
—— Maliboogal
—— Frederick Brown
—— Joachim Wandji
For embedded systems engineers, selecting a display often means locking into a specific communication protocol early in the design process. What if you could choose a display that adapts to your project's needs, rather than the other way around? The 2.4-inch TFT LCD Module SFTO240PY-7190AN from Saef Technology Limited is engineered with this exact flexibility in mind, featuring a multi-interface architecture that supports RGB, MCU, and SPI protocols.
Decoding the Multi-Interface Flexibility
The key to this module's versatility lies in its IM0, IM1, and IM2 configuration pins. By setting simple logic levels on these pins, engineers can switch between several interface modes:
8-bit, 9-bit, 16-bit, and 18-bit MCU Parallel Interface: Ideal for complex graphical user interfaces (GUIs) where high data throughput is necessary for smooth rendering. This is a common requirement in industrial HMIs and medical devices where processors with dedicated LCD controllers are used.
3-line and 4-line SPI: Perfect for space-constrained or cost-sensitive designs where the host microcontroller has limited GPIO pins. This is a go-to choice for portable consumer electronics and IoT devices.
RGB Interface: The standard for high-speed video data streaming, suitable for applications requiring the fastest refresh rates.
This "future-proof" design allows for last-minute processor changes or platform upgrades without the need to redesign the display interface, significantly reducing development time and risk.
High-Brightness Performance for Demanding Environments
Beyond interface flexibility, this module delivers exceptional optical performance. With a typical luminance of 1000 nits, it ensures perfect readability even under direct sunlight or bright indoor lighting—a critical feature for automotive dashboards, outdoor portable devices, and industrial equipment. The 750:1 contrast ratio and 80-degree viewing angle guarantee a sharp, clear image from various perspectives.
By selecting the SFTO240PY-7190AN from Saef Technology Limited, you are not just choosing a display; you are selecting an adaptable, high-performance visual solution that empowers your design process and ensures your product excels in its intended environment.

